ISR 9024S-M can not take admin password
I have a ISR 9024S-M which can not take admin password. Looks like the partition is fed up by log file. Is there any way to free the partition or how to factory reset it? Please help!Here is the screen...
View ArticleRe: ISR 9024S-M can not take admin password
PPCBoot 1.1.6 (Nov 16 2004 - 08:21:51) CPU: IBM PowerPC 440 Rev. CBoard: Artesyn Technologies PM/PPC-440gp Artesyn Monitor Version 1.5.0 VCO: 800 MHz CPU: 400 MHz PLB: 133...
View ArticleRe: I have problem porting my RDMA application from InfiniBand(Mellanox...
Hi, I recommend opening a ticket to support@mellanox.com and provide a code snippet of what you're trying to do so it will go into the appropriate resource.
View ArticleRe: M2401G Switch Redundancy?
the first 15 ports are the external ports of the switch blade. it's not editable
View ArticleRe: Subnet manager between different switch brand
A couple of comments on this: 1. SM Priority 0 is lowest priority and 15 is highest. You might want to set Intel switch SM to be higher SM priority than Mellanox/Voltaire switch SM priority. 2. Best...
View ArticleRe: OpenMPI MXM problem
Does the same failure if pre-compiled OpenMPI used?Did you try to avoid LSF and run mpirun directly? Maybe allocate nodes used LSF and the from the other terminal run the MPI job.Try to add...
View ArticleRe: not able to compile the kernel client module
Your module is compiling against the vendor kernel sources instead of MOFED. You might take a look on the other projects that compile against MOFED, for example Lustre.
View ArticleRe: OpenMPI MXM problem
Does the same failure if pre-compiled OpenMPI used? Yes - that is what I meant by running HPC-X Did you try to avoid LSF and run mpirun directly? Maybe allocate nodes usedLSF and the from the other...
View ArticleClik here to view.
Re: mlnx_add_kernel_support.sh and magic version errors.
Hi Nathan, Did you actually download and install the MFT package version 4.3.0 for Linux, which is required if you wanted to use the MFT utilities.http://www.mellanox.com/page/mlxup_firmware_toolNOTE:...
View ArticleRe: mlnx_add_kernel_support.sh and magic version errors.
I didn't download the MFT package. I must have used the MFT supplied in MLNX_OFED_LINUX-3.2-2.0.0.0-oel7.1-x86_64.tgz. It looks like I have mft 4.3# mst version**mst, mft 4.3.0-25, built on Jan 25...
View ArticleNIC always in initializing state after update firmware
I have a Connect-IB card and when I am installing the latest MOFED 3.2. The installation step automatically update the firmware version to 10.14.2036. But after I reboot my system, the card state is...
View ArticleRe: OpenMPI MXM problem
Hi Nils,Turns out that you need to add this "-x MXM_OOB_FIRST_SL=0" to your mpirun on your cluster.Otherwise if you do a pstack on a process which it is hung, you would find that the process is hung in...
View ArticleClik here to view.
Re: ISR 9024S-M can not take admin password
Hi James, Try to login as root and clear some room on the disk: Login to the switch as root (default root credentials below unless someone changed them before the switch arrived to your possesion)User:...
View ArticleClik here to view.
Re: ISR 9024S-M can not take admin password
Dear Eddie Notz, Thank you so much. The password works. I logged in and go to /mnt/jffs. I found a hug log file and deleted it. Then I run reboot. After reboot the Infiniband switch works...
View ArticleRe: Mellanox Infiniband + mmap() + MPI one-sided communication fails when...
MOFED does have openmpi that use UD QP by the default, or you can try HPC-X Toolkit from Mellanox site, that available for different OSes.Check ulimits (Environment Problems | Intel® Developer Zone)...
View ArticleClik here to view.
connecting two Connectx 2 nics
I want to connect two workstations together using two Connectx 2 nice. Both appear to be functioning correctly.Windows 10 on both machines
View Articleib_send_bw performance puzzle
I tried play with ib_send_bw with different message sizes. I noticed that the best performance can be reached if the size is power of two. I tried different size with 1 byte smaller or 1 byte larger,...
View ArticleRe: mlnx_add_kernel_support.sh and magic version errors.
I'm not sure how this issue was marked with a "correct answer." I downloaded and tried the stand-a-lone 4.3.0 mft utilities and there is no difference in behavior. "mst start" still fails for the...
View ArticleRe: mlnx_add_kernel_support.sh and magic version errors.
I'm not sure how this issue was marked with a "correct answer." I downloaded and tried the stand-a-lone 4.3.0 mft utilities and there is no difference in behavior. "mst start" still fails for the...
View ArticleCreating undionly.kpxe from https://git.ipxe.org/vendor/mellanox/flexboot.git
All, I am attempting to use drivers recently updated (by wissams@mellanox.com) on ipxe.org's git repository to create a undionly.kpxe. Currently the latest compiled undionly obtained from ipxe.org...
View Article