Dear Eddie Notz,
Thank you so much. The password works. I logged in and go to /mnt/jffs. I found a hug log file and deleted it. Then I run reboot. After reboot the Infiniband switch works perfectly.
Here is the screen dump:
# cd /mnt
# ls
jffs x
# cd jffs/
# ls
nvigor-Apr_14_2013-01_47_48.log nvigor-Sep_18_2014-20_16_10.log
nvigor-Jul_23_2014-18_43_09.log voltaire
nvigor-Jun_13_2011-14_12_55.log
# ifconfig
# /sbin/ifconfig
# rm nvigor-Apr_14_2013-01_47_48.log
# ls -l
-rw-r--r-- 1 root root 5080 Sep 17 2014 nvigor-Jul_23_2014-18_43
_09.log
-rw-r--r-- 1 root root 59418 Mar 22 2013 nvigor-Jun_13_2011-14_12
_55.log
-rw-r--r-- 1 root root 52816131 Nov 18 18:42 nvigor-Sep_18_2014-20_16
_10.log
drwxr-xr-x 1 root root 0 Nov 21 2006 voltaire
# rm nvigor-Sep_18_2014-20_16_10.log
# ls -l
-rw-r--r-- 1 root root 5080 Sep 17 2014 nvigor-Jul_23_2014-18_43
_09.log
-rw-r--r-- 1 root root 59418 Mar 22 2013 nvigor-Jun_13_2011-14_12
_55.log
drwxr-xr-x 1 root root 0 Nov 21 2006 voltaire
# df
Filesystem 1k-blocks Used Available Use% Mounted on
rootfs 63461 49961 13500 79% /
/dev/ram0 63461 49961 13500 79% /
/dev/mtdblock2 10240 2532 7708 25% /mnt/jffs
# reboot
# ibsw-init.sh stop...
Thu Mar 17 19:07:16 UTC 2016
nvigor.sh stop...
Thu Mar 17 19:07:16 UTC 2016
/usr/voltaire/scripts/nvigor.sh: /etc/local_profile: No such file or directory
umount: /mnt/jffs: Device or resource busy
umount: Cannot remount /dev/mtdblock2 read-only
umount: /mnt/jffs: Device or resource busy
umount: Cannot remount /dev/ram0 read-only
umount: /: Device or resource busy
umount: Cannot remount /dev/ram0 read-only
umount: /: Device or resource busy
The system is going down NOW !!
Sending SIGTERM to all processes.
Please stand by while rebooting the system.
Restarting system.
PPCBoot 1.1.6 (Nov 16 2004 - 08:21:51)
CPU: IBM PowerPC 440 Rev. C
Board: Artesyn Technologies PM/PPC-440gp
Artesyn Monitor Version 1.5.0
VCO: 800 MHz
CPU: 400 MHz
PLB: 133 MHz
OPB: 66 MHz
EPB: 66 MHz
I2C: ready
DRAM: ECC Init ....Done 128 MB
FLASH: 64 MB
Initializing board as Monarch....
Scanning for PCI devices....
Scanning PCI devices on bus 0
LOCALE VEND DEV REV BASE0 BASE1 BASE2 BASE3 BASE4 BASE5
------- ---- ---- --- -------- -------- -------- -------- -------- --------
00,0d,0 10b5 9056 ba 80000000 b0800000 80200000 80400000 ........ ........
In: serial
Out: serial
Err: serial
Net: EMAC0, EMAC1
BEDBUG:ready
Hit any key to stop autoboot: 0
booting secondary, press ^c to abort
booting...
## Booting image at d0a00000 ...
Image Name: Linux Multiboot-Image 2.4.21-pmp
Created: 2006-08-24 11:41:03 UTC
Image Type: PowerPC Linux Multi-File Image (gzip compressed)
Data Size: 20363540 Bytes = 19886 kB = 19 MB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 780651 Bytes = 762 kB = 0 MB
Image 1: 19582876 Bytes = 19123 kB = 18 MB
Verifying Checksum ... OK
Uncompressing Multi-File Image ... OK
Loading Ramdisk to 06cb1000, end 07f5df9c ... OK
Linux version 2.4.21-pmppc440-V02 (root@murzim) (gcc version 2.95.4 20010319 (pr
erelease/franzo/20011204)) #1 Thu Aug 24 14:39:17 IDT 2006
Artesyn PM/PPC440 Copyright 2003, Artesyn Communication Products, LLC
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,38400 root=/dev/ram0 rw ip=192.168.0.101:::25
5.255.255.0:0.0.0.0:eth1:none
Calibrating delay loop... 599.65 BogoMIPS
Memory: 108300k available (1336k kernel code, 572k data, 60k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-algo-pcf.o: i2c pcf8584 algorithm module
i2c-proc.o version 2.6.1 (20010825)
ST M41T00 Real-Time Clock Driver 0.01 03 Jan 2003
i2c-core.o: driver m41t00 registered.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xfdeec200 (irq = 0) is a 16550A
ttyS01 at 0xfdeeb300 (irq = 1) is a 16550A
IBM gpio driver version 07.25.02
GPIO #0 at 0xc9070700
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
loop: loaded (max 8 devices)
init_ppc405_enet(): vtr: ENET driver v1.1
Zmii bridge in RMII mode
eth0: Phy @ 0x4, type BCM5221 (0x004061e4)
Reset ethernet interfaces
Zmii bridge in RMII mode
eth1: Phy @ 0x5, type BCM5221 (0x004061e4)
Reset ethernet interfaces
Using buffer write method
Using buffer write method
Using buffer write method
Using buffer write method
Concatenating MTD devices:
(0): "Flash Bank"
(1): "Flash Bank"
(2): "Flash Bank"
(3): "Flash Bank"
into device "All Flash Banks"
Creating 3 MTD partitions on "All Flash Banks":
0x03500000-0x03f00000 : "Primary Kernel"
0x00a00000-0x03500000 : "Secondary Kernel"
0x00000000-0x00a00000 : "Jffs"
IBM IIC driver
i2c-dev.o: Registered 'IBM IIC adapter' as minor 0
i2c-core.o: client [m41t00] registered to adapter [IBM IIC adapter](pos. 0).
i2c-core.o: adapter IBM IIC adapter registered as adapter 0.
i2c-dev.o: Registered 'IBM IIC adapter' as minor 1
i2c-core.o: adapter IBM IIC adapter registered as adapter 1.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Voltaire PPC440 I2C EEPROM Driver 0.02 04 Mar 2004
i2c-core.o: driver ppc440_i2c_eeprom registered.
i2c-core.o: client [ppc440_i2c_eeprom] registered to adapter [IBM IIC adapter](p
os. 1).
klr_init_module: p_klr_buffer = c6000000
klr_init_module: ------------------------------------- memory overrun
Kernel logger buffer is at:0xc6000000, size: 4083, initializing new buffer
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 19123k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 60k init
init started: BusyBox v0.60.5 (2006.05.17-12:13+0000) multi-call binary
Mounting proc file system.
ibsw-init.sh start...
Thu Mar 17 19:07:56 UTC 2016
INSTALL FLAG 0
starting syslogd & klogd ...
Starting ISR: ISR-9024 Version: 3.4.5
ISR9024S-21c8 login: admin
Password:
Login incorrect
ISR9024S-21c8 login: admin
Password:
Login incorrect
ISR9024S-21c8 login: admin
Password:
Login incorrect
ISR9024S-21c8 login: