Re: Suggestions for *quiet* Infiniband switch?
The experts around this community site typically knowledgeable about Mellanox products. this is a Flextronix product (not made by Mellanox).googled this switch model found the following:...
View ArticleClik here to view.
Re: Neutron ML2: VM instances do not get IP via DHCP
This issue is solved finally. There were two problems that are needed to be fixed: 1) Openstack icehouse documentation (Configure network node - OpenStack Installation Guide for Red Hat...
View ArticleRe: Icehouse: Query on mellanox neutron ml2 driver for SR-IOV
One more piece of information in this context as per Irena Berezovsky (I validated it):"if you wish to create VMs with only SR-IOV vNICs, there is no need to install openvswitch agent on compute nodes....
View ArticleRe: Is ibdump in Mellanox OFED 2 supported in Ubuntu 14.04?
I've uninstalled OFED and installed MLNX_OFED_LINUX-2.3-2.0.0 on my SUSE host, but ibdump does not work better. # ibdumpInitiating resources ...searching for IB devices in hostPort active_mtu=4096MR...
View ArticleRe: Is ibdump in Mellanox OFED 2 supported in Ubuntu 14.04?
It was working for me on MLNX_OFED 2.0-3.0.0 on Ubuntu 12.04.Now that I upgraded to the latest version of the drivers (2.3-2.0.0), I got the same error as the one you got. However, if I use the ibdump...
View ArticleRe: Is ibdump in Mellanox OFED 2 supported in Ubuntu 14.04?
Now, it works also for me with ibdump 2.0.0-5 (the one included in MLNX_OFED 2.0-3.0.0).So it seems there is a regression in ibdump 2.0.0-9 (the one included in MLNX_OFED_LINUX-2.3-2.0.0)I can see my...
View ArticleClik here to view.
Re: MTU 4K on ISR 9024-D-M
Hello yairi, yes, it is quite an old switch... On page 224 there is instruction on how to view the MTU and below in table 23-5 is the following information: Field Description...
View ArticleHelp - Support - IS5022 Series Switch - IP address configuration
I am looking support for basic IP address configuration for IS5022 Series Switch and MCX353A QCBT Adapter installed in dell server, we are unable to connect other server in Cent OS / Linux - (Drivers...
View ArticleRe: Help - Support - IS5022 Series Switch - IP address configuration
Hello, IS5022 is an unmanaged switch so if you are referring to management interfaces configuration - it has none. it is simply a plug and play switch where a subnet manager has to be configured on a...
View Articleopensm with legacy Connectx adapters
We would like to use newer opensm (eg. OFED 3.5) with older connectx HCA on linux hosts. The connectx adapters have the latest firmware (version 2.8). However the new opensm seems to require a...
View ArticleRe: opensm with legacy Connectx adapters
Hi Chris, How did you figure out the issue with the non-default partition/partition key?can you share the following:Which opensm version are you using?opensm --version any flags/configuration files...
View ArticleClik here to view.
Re: ConnectX MNPH29B-XTC_A1-A2 peak traffic
Yes, firmware and driver latest:# ethtool -i eth0driver: mlx4_enversion: 2.3-1.0.0 (Nov 23 2014)firmware-version: 2.9.1000bus-info: 0000:04:00.0supports-statistics: yessupports-test:...
View ArticleClik here to view.
Re: Suggestions for *quiet* Infiniband switch?
I'm also find ibswitch site and some links.Good luck fr you...:)
View ArticleXenserver 6.5 Creedence...
With Xenserver 6.5 Creedence set to launch any day now, has it been tested with InfiniBand software and drivers? (they are skipping 6.3-4). Its based on RHEL/Cent 7 x64 for DomO. Does Mellanox ever...
View ArticleSuse Enterprise Linux 12 support?
Is there a schedule set when InfiniBand drivers and software will be compatible with Suse Enterprise Linux 12?Are beta drivers and software available?
View ArticleRe: Suse Enterprise Linux 12 support?
Hello, The planned release is for MLNX_OFED 2.4 which should be around somewhere first half of 2015 I'm not aware of any beta releases at this stage, however support can better answer that.
View ArticleClik here to view.
New Setup Question
Hello, I have several CENTOS 6 Linux servers and clients. I would like to create a private network using the Mellanox equipment for high speed data transfers between servers, and between servers and...
View ArticleRe: OFED install - not a valid identifier issue
I myself just tried the 6.6 package for the first time on a new machine. Some details: # uname -aLinux <blah> 2.6.32-504.1.3.el6.x86_64 #1 SMP Fri Oct 31 11:37:10 EDT 2014 x86_64 x86_64 x86_64...
View ArticleRe: New Setup Question
Hi, starting with your switches, I am not sure what SX5012 is. Maybe you were referring to SX6012? Connecting things with the HCA you were thinking of using, keep in mind that the InfiniBand technology...
View Article