Re: MT26428 in esxi 4.1u1
You must install the driver on supported ESXI host and update host with later version...:)
View ArticleRe: MT26428 in esxi 4.1u1
um... 4.1 update 1 is supported according to the driver. and... the last part is basically non-sense. I cannot simply "update host with later version" without tens of thousands of dollars. Is this...
View ArticleNeed Driver
I need window 2003 64 bit / Redhat linux 6.0 64 bit driver for mellanox model no :- MCX312A-XCBT Regards,Nitesh Patel
View ArticleRe: MSX6036F-1SF"x"
Hi, 1) same performance on both SwitchX and SwitchX product lines.2) Yes. fully compatible. Cheers!
View ArticleRe: MSX6036F-1SF"x"
Thx, yairips, I think you forgot to add a "2" to your response on 1) {...SwitchX and SwitchX...}
View ArticleRe: MT26428 in esxi 4.1u1
No.There is restriction that build number.You can find it on release notes or manuals.I remember that I used vSphere OFED on vSphere 4.x...:)
View ArticleRe: SNMP polling issues
Hi Bill,This is a bug in 3.3.4100, it was fixed in the last release. could you consider upgrading the system to the latest version? Thanks,Ophir.
View ArticleClik here to view.
Re: MT26428 in esxi 4.1u1
Per documentation:Before installing, please verify if you have on your machine of the following ESXi builds. Run:/usr/bin/vmware -vVMware ESXi 4.1.0 build-348481' - ESX 4.1 Update 1VMware ESXi 4.1.0...
View ArticleRe: MT26428 in esxi 4.1u1
Hi!Mellanox vSphere OFED for vSphere 4.x has a restriction.Major problem was that need always major build ESXi host. If there non major build ESXi host then you engage the installation problem.I was...
View ArticleRe: MT26428 in esxi 4.1u1
Yeah, thats what i am saying. this is on a major build. and i had the error, however, i got some help from mellanox in this subject. Enabled some logger and the installation went as expected. ill post...
View ArticleRe: SX1012 Openflow => Defense4All via OpenDaylight Controller
Hi Daniel,Our switches supports OpenFlow 1.0, we did not check especially with Open Daylight beside doing some foo-foo tests.Defense4All redirects traffic to an AMS (Radware’s DefensePro AMS) which...
View ArticleMCX314A-BCCT ConectX-3Pro EN Dual QSFP+ only one port visible in OS
I installed the MCX314A-BCCT ConectX-3Pro EN in CentOS 6.5 and installed the MLNX_EN driver.The MLNX_EN driver seems to be installed. The ethtool command shows: driver: mlx4_enversion: 2.1.11 (Mar 10...
View ArticleRe: ESXi 5.5 ib_ipoib questions
You can't install vSphere OFED for ESXi 4 on ESXi 5 host...:)
View ArticleRe: ESXi 5.5 ib_ipoib questions
Yeah, I found that out shortly after posting...:-/ I am currently modifying the descriptor.xml and sig file from the net-ib-ipoib.vib from the OFED 1.8.2 and trying to take the payload from ESXi 4...
View ArticleClik here to view.
Re: MCX314A-BCCT ConectX-3Pro EN Dual QSFP+ only one port visible in OS
For some reason the second qsfp+ port shows up as Eth1 instead of p5p2. Not sure why.
View ArticleRe: Difference between 1012+GW and 6012+GW
Hi,SX1012 + GW license is equal to SX6012 with GW license.The 56GbE license does not include the GW license, it give the ability to reach higher speed (56GbE) on the Ethernet links. if you have just...
View ArticleRe: Difference between 1012+GW and 6012+GW
Hi, Thank you. Is there a way then to make the SX6012 reach 56GbE? I haven't found any upgrade licenses mentioning 56GE for the 6012, only the 1012. - Thorvald
View ArticleRe: Difference between 1012+GW and 6012+GW
You can use install the 56GbE license on the SX6012 (that have GW license) to reach 56GbE on the Ethernet ports of the Gateway. Ophir.
View ArticleRe: Voltaire HCA 400EX - Drivers
I am pretty sure my cards were the same way, voltaire but I had to re-flash them with the connectX firmware to get them to work with windows. You can try this: Download the mellanox firmware tools,...
View Article