Re: MLNX OFED 3.2 centos 7.2 with RT kernel error
The official build of Mellanox OFED (and as far as i know, also the community OFED) never tested on RT kernels. I don't believe that the code was ever ported properly to work on such kernels. For RT...
View ArticleRe: MHQH19B-XTR and MSX6036F-1SFS
Yes, the two are compatible and obviously the agreed speed would equalize to the lowest common denominator
View ArticleRe: MLNX OFED 3.2 centos 7.2 with RT kernel error
You can try it.It works fine with 3.2-1.0.1.and with inbox driver - libvma doesnt work at all.
View ArticleRe: Mellanox Voltaire 4036E
Hi Francesco, Any SFP+ transceiver can work as long it's following the SPEC.Most customers uses Mellanox or Finisar based SFP+ transceivers with the 4036E
View ArticleClik here to view.
Mellanox Technologies MT26468 [ConnectX EN 10GigE, PCIe 2.0 5GT/s...
Hello, we use Xenserver 6.2 SP1 with the following NIC:Mellanox Technologies MT26468 [ConnectX EN 10GigE, PCIe 2.0 5GT/s Virtualization+] (Hewlett-Packard Company HP NC542m Dual Port Flex-10 10GbE BLc...
View Articlehow i get powershell module
how i get powershell module with command Sets like Get-MlnxNetAdapter
View ArticleRe: my codes need to include umad.h and mad.h, but I can't find them on...
Hi, you are probably referring to a driver downloaded from the OpenFabrics project. I am not 100% sure about your question but asking if you mind trying the latest Mellanox buid for the same operating...
View ArticleFirmware Mellanox Voltaire 4036E ?
Hello, while voltaire website no more exist somebody know where i can found the latest firmware for the voltaire 4036E ?Thanks
View ArticleClik here to view.
CHELSIO T580-CR and QSFP-40G-DAC -3M CISCO PASSIVE COPPER CABLE not working...
As stated, recently got all 3 of these pieces of hardware, installed drivers for Chelsio adapter in Windows 7 (also tried Win 8), seems to install correctly. However, when I connect it, neither the...
View ArticleRe: CHELSIO T580-CR and QSFP-40G-DAC -3M CISCO PASSIVE COPPER CABLE not...
Hello, So cable interop/detection usually happens at the firmware level and as such interop issues can arise unfortunately like your seeing.Mellanox does not test interop with all 3rd party cables and...
View ArticleROCEv2 on ConnectX-3 (not ConnectX-3 Pro)
Greetings! Can anybody definitely tell if ConnectX-3 (not PRO) does support RoCEv2? CentOS-7.2, Mellanox OFED 3.2.2[root@5810-client ~]# cat /sys/module/mlx4_core/parameters/roce_mode...
View ArticleClik here to view.
OFED/IBDUMP for ConnectX-4
Hi, Has anybody experienced any problems on IBDUMP utility with ConnectX-4 cards? Would appreciate for advice on this matter. CentOS-7.2/Mellanox OFED-3.2.2 Workstation has both ConnectX-3 and...
View ArticleRe: OFED/IBDUMP for ConnectX-4
Update: found this oneHowTo Dump RDMA traffic Using the Inbox tcpdump tool But: CentOS-7.2/OFED-3.2.2 [root@5810-client ~]# which ethtool/opt/mellanox/ethtool/sbin/ethtool[root@5810-client ~]# ethtool...
View ArticleI have problem porting my RDMA application from InfiniBand(Mellanox...
So, I have a small application written in C testing RDMA write. It works perfectly on Mellanox ConnectX-3 40Gb IB NIC. We got new Mellanox ConnectX-4 100GbE hardware, which supports RoCE (Testing with...
View ArticleM2401G Switch Redundancy?
Hi everyone, glad to be on this community.I have two Mellanox M2401G Infiniband switches, which are the Dell blade switches for M1000e.They seem to work, but I have some issues here and maybe someone...
View ArticleRe: M2401G Switch Redundancy?
hi Paul, If you don't have a phyiscall link between the 2 switches - meaning they are part of the same IB network then no failover is possible. Also - the output of ibstat confirms that that each port...
View ArticleRe: Firmware Mellanox Voltaire 4036E ?
Hello,I would suggest that you open a support account with Mellanox.
View ArticleRe: M2401G Switch Redundancy?
Hi Eddie thank you for your response.I can setup a link between those two switches easy but if I remember correctly when I've done that the switches behave strange as in a loop or something, high io...
View ArticleRe: MHEA28-XTC on Windows Server 2012 R2 and Windows 7
It's been a while and I had given up on these cards but last week I received two new servers and saw the cards laying on the shelf and figured I'd give it another go.Figured I'd post my results here if...
View ArticleRe: ROCEv2 on ConnectX-3 (not ConnectX-3 Pro)
Hi ConnectX-3 doesn't support RoCEv2RoCEv2 supports starts only from ConnecX-3 Pro cards.
View Article