Re: MHGH28-XTC not working
Hi, The mst status command responds with...MST devices:------------ mt25418_pciconf0 mt25418_pci_cr0 C:\Program Files\Mellanox\WinMFT>mlxburn -dev_type 25418 -dev mt25418_pci_cr0 -image...
View ArticleRe: MHGH28-XTC not working
Opensm is now running C:\Program Files\Mellanox\MLNX_VPI\IB\Tools>ibstatCA 'ibv_device0' CA type: Number of ports: 2 Firmware version: 0x2000903e8 Hardware version: 0xa0...
View ArticleRe: ConnectX-3 CX312A-XCBT and Thunderbolt
My MacPro (2008) finally died for the last time earlier this year. It was getting machine check faults at boot, and I had replaced the motherboard (under warrantee) and the power supply (out of...
View ArticleRe: ConnectX-3 CX312A-XCBT and Thunderbolt
The hot plug and power management stuff referred, I believe, to the driver, and I will definitely have to address those issues, which might present a challenge. The x4 electrical and PCIe 2.0 issues I...
View ArticleRe: ConnectX-3 CX312A-XCBT and Thunderbolt
I wonder if this has anything to do with it: "Once the firmware image has been loaded to the device’s internal memory and component initial- ization has completed, the device is ready to respond to...
View ArticleRe: ConnectX-3 CX312A-XCBT and Thunderbolt
As a thought, I remember ages ago looking for lspci for OSX too. Finally found one, and it worked well. I think it was by some of the guys that work on the Hackintosh side of things, so if you look...
View ArticleWhere to source low profile pci brackets.
Hi, Where can I source 3 sets of PCI brackets to fit the MHGH28-XTC card please. Rumour has it that Mellanox sell these direct to the public but more information would be welcome. I am currently...
View ArticleRe: ConnectX-3 CX312A-XCBT and Thunderbolt
I found all that. Too much effort to get it all to work with what else I have going on right now, but I am planning on resolving the Mlx4_core "nub" class compile issues so that it loads, and marking...
View ArticleRe: ConnectX-3 CX312A-XCBT and Thunderbolt
With the device in an HP, I can view the PCIe Link Capability register. I find that it has a value of 843f483. Ignoring the 'port #' field, I find that this indicates: supported link speeds: 3 (no...
View ArticleClik here to view.
Re: Where to source low profile pci brackets.
reach out to Mellanox support and check if there are in inventory.. it's not a new card. I wouldn't get my hopes high. Did you try on eBay?
View ArticleSuggestions for *quiet* Infiniband switch?
Does anyone have suggestions for a quiet Infiniband switch, suitable for home use? Preferably 8+ CX4 ports (can be 16, 24, 30+, etc), DDR and is fairly quiet. Fanless - or close to - would be awesome....
View ArticleRe: Where to source low profile pci brackets.
If that doesn't work, I kind of wonder if it's something a 3D printer could do...
View ArticleRe: MHGH28-XTC not working
Ok, now I see what ;unhappy with driver support' means . There appears to be no SRP driver in the Windows 2012 package . That is a fair sized blow to my plans. Oh well, back to Windows 2008r2 then.
View ArticleRe: Where to source low profile pci brackets.
Thanks, The model I have is just for full height brackets XTC (T for Tall). I will have a look now just in case though.
View ArticleRe: Where to source low profile pci brackets.
Haha, yep, would probably work although someone would have to create the design for the printer to follow and I truly suck at 3D software. I did make a full height PCI bracket for a P812 SAS controller...
View ArticleRe: MCQH29-XDR firmware for RDMA
Hi. Was wondering if there was any progress with this?
View ArticleRe: MCQH29-XDR firmware for RDMA
i would think the FW specified and the card should fully support RDMA.i will check internally with few other folk... standby.
View ArticleRe: Suggestions for *quiet* Infiniband switch?
Funny, I was just talking about the same thing with an employee. The old SDR 8-port switches were incredibly loud (A low-port DDR one was never made.). It was amazing how much noise a small little...
View ArticleClik here to view.
Re: Suggestions for *quiet* Infiniband switch?
Interesting. Looking on eBay for IS5022 and SX6012... nothing in the "home/hobby project" type of budget (at the moment). There are Flextronic 1U CX4 switches around though, fairly lost cost (in...
View Article