Windows RDMA storage software
Is there any RDMA based storage software available for server 2008 R2?
View ArticleClik here to view.
Re: ib_write_bw error connecting to server with rdma_cm option
Thanks Talat, your suggestion to use IP to connect was correct, I was trying with the wrong NIC IP, using the ib IP worked.
View ArticleClik here to view.
How to connect two (small) fat tree networks
Hello, we run two (small) fat tree IB networks in our datacenter. Now we would like to merge the two into a single IB fabric - but we don't want to create a single fat tree. All we need is the...
View ArticleConnecting SX1710s to HP FlexFabric 560SFP+ - No Link
Hi, We have a pair of Mellanox SX1710's that we have connected to two servers with HP FlexFabric 560SFP+ adapters using a pair of Mellanox MC2309130-002 cables. The servers are running Windows 2012...
View Articlenvidia_peer_memory for Cuda8 ?
Hi, Seems that latest nvidia-peer_memory kernel module is not compatible with Cuda8 driver. Any hints? NVRM: loading NVIDIA UNIX x86_64 Kernel Module 367.48 Sat Sep 3 18:21:08 PDT 2016nvidia...
View ArticleRe: Connecting SX1710s to HP FlexFabric 560SFP+ - No Link
Hi Please set the switch port side to 10g : Switch(config)# interface ethernet 1/x speed 10000 force
View ArticleRe: Connecting SX1710s to HP FlexFabric 560SFP+ - No Link
That did the trick. Thank you!
View ArticleRe: Usage of CX4 to QSFP cable for the Application
Hi Dan. Thanks for your reply. Yes, both the hardware are VPI capable. As you suggested both link partners to work in same protocol. If both are configured Infiniband, x4 links from CX4 connector...
View ArticleRe: Usage of CX4 to QSFP cable for the Application
The configuration and FW version used by the OEM needs to be reviewed in order ensure 10GbE option is enabled over a single lane. Please extract the configuration file (.ini) file using flint tool...
View ArticleWhere can I find the firmware for ConnectX-3 MT27500 v2.34.5000 for...
Hello everyone, I'm looking for this firmware for my Infiniband device, we have some card with v2.32.5100 and some other with 2.34.5000 in our cluster. I looked on the Dell website and Mellanox...
View ArticleRe: Where can I find the firmware for ConnectX-3 MT27500 v2.34.5000 for...
Hi!Did you try flint command with switch dc to extract ini configuration your Dell Infiniband HCA? Below is tiny step.01. You must extract *.ini from your Dell HCA with flint & dc switch.02....
View ArticleClik here to view.
Re: Usage of CX4 to QSFP cable for the Application
Many Thanks for your Reply.it is confirmed by OEM that this hardware supports 10G over 4 lanes. It seems they dont allow change in the mode of operation. (firmware of hardware need to be modified) In...
View ArticleRe: OpenMPI with MXM 32bit issue
Hi Alina, we can confirm, that the issue is solved with the updated MXM version.Was the problem connected to a 32 bit number or something completely different? Thanks a lotThomas
View ArticleRe: Mellanox Connectx-2 shows cable unplugged when connected to switch
Hi Van, Regarding your question please note that Subnet Manager is applied only when working in Infiniband protocol.there are no special driver setting when connecting to a third-party switch and it...
View ArticleRe: OpenMPI with MXM 32bit issue
Hi Thomas, Yes, the issue had something to do with it but it was something internal, not in the API. Thank you for reporting this.Alina.
View ArticleRe: Where can I find the firmware for ConnectX-3 MT27500 v2.34.5000 for...
Hi,you can find them under this link http://www.mellanox.com/page/firmware_table_dell?mtag=oem_firmware_download , in this page choose adapters and there you can find the last GA firmware. as i see in...
View ArticleRe: Where can I find the firmware for ConnectX-3 MT27500 v2.34.5000 for...
Perfect thank you ! Do you know if it's possible to get an older version ? (just in case... )
View ArticleRe: Where can I find the firmware for ConnectX-3 MT27500 v2.34.5000 for...
sure, in addition you can save the current fw image that installed on the device.see mstflint or flint help page (ri command) ri <out-file> : Read the fw image on the...
View ArticleClik here to view.
Re: Dfms high rate is not supported and lots of others
Hi Nikolay ,could you please send the operation system, FW and driver version of the device ? FW : flint -d <mst-device> q Driver: ofed_info -s ormodinfo mlx4_core
View ArticleRe: How Can I change my group members?
Please submit the registration form again. New submission will override all previous ones.To submit new registration http://omniqrcode.com/q/hackatop
View Article