Re: nvidia_peer_memory-1.0 build fails on CentOS 6.8
Lustre does not compile either, reason is the same: In file included from /usr/src/ofa_kernel/default/include/linux/kernel.h:4, from...
View Articlemlx4 interrupt carsh observed in ARM
Hi,I have connected one MLX4 X86 machine and other MLX4 ARM board. Both are connected as point to point.I have sent one command from X86 to ARM. after sending command ,x86 will expect response. but X86...
View ArticleClik here to view.
Qos options and Vlarb table
Hello allCan't understand some things If I have vlarb_high ( for highest vl priority) why necessary vlarb_low if we already setup high priority traffic ? Is it for specialty set lowest priority ? Is it...
View ArticleMulticast via switch between two Windows machines does not work
Hello, I encountered an issue with IB multicast data between 2 Windows computers with ConnectX-3 Mellanox adapters via IB switch.Multicast does not work: Mellanox counters on the sender machine...
View ArticleConnectx-3 VPI not seeing switch
We have a brand new IBM RackSwitch G8316. The settings are more or less the defaults (we did change the IP address on the switch in order to access the admin interface, but that's basically it). I...
View ArticleRe: ConnectX-3 Windows 7 Driver Signature Error
We did uninstall, reboot, re-download and re-install. Twice. Same problem both times. Same problem on two different machines with different cards. Only installing 5.10 worked.
View ArticleClik here to view.
Re: Connectx-3 VPI not seeing switch
I should point out that we also have a FreeBSD box running FreeNAS with a Chelsio 40GbE card in it. That's connected to the switch via the 2m Tripp-lite cable mentioned above, and is working perfectly...
View ArticleRe: How to extract individual BIN files from an MFA firmware archive?
Hi, This operation is not possible.Which firmware version do you need and for which PSID? BR,Viki
View ArticleRe: few questions about sx6012
Thank you!Can you, please clarify why I can download firmware for any unmanaged switch, and I can't for any managed?
View ArticleRe: Qos options and Vlarb table
Hi Serge, the InfiniBand specification defines that VL arbitration can have multiple priorities. This mechanism helps implement other priority-based services like QoS. To your specific question: yes,...
View ArticleRe: few questions about sx6012
For unmanaged: http://www.mellanox.com/page/firmware_table_SwitchX For Managed (requires a support login account): Login | myMellanox
View ArticleRe: Qos options and Vlarb table
Hi yairiThanks for replyI read IB spec but it seemed to meextraordinary that the IB has several tables priorities for the same of VL.As I know the Ethernet have only one table of priority for QoS.Can...
View ArticleRe: Kernel panic while booting linux
Check if the issue can be reproduced with latest Mellanox OFED. It might be interesting if you can also check if the issue still happen when most of services are disable on the host during the...
View ArticleConnectX-4 Single/Dual-Port Adaptor: IPv6 Certification?
Does the Mellanox ConnectX-4 Adaptor have IPv6 certification?If so, how can one demonstrate or reference the certification? I know if supports IPv6, but is it certified? Thanks, dana
View ArticleRe: Connectx-3 VPI not seeing switch
Hello Perry,This may be caused by old firmware on the ConnectX-3 adapter.The firmware should be at least 2.32.5550 for ConnectX-3 adapters.I recommend updating the adapter fw to the latest version...
View Articleeoib in driver 2.1 or later
Whether eoib support in mlnx driver 2.1 or later? Can not find it in release.
View ArticleClik here to view.
Re: eoib in driver 2.1 or later
OS is RHEL 6.5 , EoIB is supported only in SLES11SP2 and RHEL6.4 in release notes 2.1.1.0.0. But eoib can enabled in RHEL 6.5 and speed is only 50MB/s.pls help or give me some advice .Thanks .
View ArticleRe: How to extract individual BIN files from an MFA firmware archive?
Hi Viki, It's no longer relevant, but thanks for your reply anyway!
View ArticleWhich ESXi driver to use for SRP/iSER over IB (not Eth!)?
Hi all, I'm a bit puzzled by the current situation with Mellanox drivers for VMware ESXi. It looks like SRP support is all dusted and won't be developed anymore. Pity, but fine, as long as iSER is...
View Article