Re: Connect-X adapter fails to receive invalid IPv6 frame
In my use case, I need to use the adapter to send/receive invalid frames for testing purpose. Do you know how to disable the validations you mention? Thank you
View ArticleClik here to view.
Re: Are there any applications using RDS over InfiniBand?
Pretty sure RDS is not tested nor actually supported (not to say it won't work) by Mellanox and the questions on it may better be directed to Oracle, including test matrix and API.
View ArticleRe: Are there any applications using RDS over InfiniBand?
Thanks Ferbs.I found that RDS driver source has been integrated into MLNX_OFED, even though RDS is not tested and supported by Mellanox.Besides, the driver code is always updated in the latest version...
View ArticleRe: What is the latest (last?) firmware for MTS3600Q-1BNC and how do I start...
Hi Bob,The 3600Q-1BNC (predecessor to the IS503X switches) is listed on the EOL (end of life) page.The link below will let you download the latest SW image for this product.The SW image contains the...
View ArticleClik here to view.
Re: Read port priority counters is 0 .
Hi Seol,1) MLNX-OS Switch Configuration: a. Have you created a VLAN and set the switchports to hybrid (or trunk) mode? b. Have you Enable PFC on the switch and on the interfaces? c. Does the...
View ArticleRe: Is it possible to update the firmware on a Voltaire ISR9024D externally...
@yairi flint and mstflint gave MFE_UNSUPPORTED_DEVICE@eddie.notz. thanks, I will try that.
View ArticleRe: Read port priority counters is 0 .
Thanks, Ophir Maor 1. Switch Port 1 and 5 not packets counters switch-5e13ce [standalone: master] (config) # show interfaces ethernet 1/1 counters priority 3 Rx 0 packets 0...
View ArticleRe: Is it possible to update the firmware on a Voltaire ISR9024D externally...
Nothing. same error.My guess is that somehow one has to disable the write protect on the EEPROM, but I have no idea on how to do that...
View ArticleRe: Read port priority counters is 0 .
Thanks, Sophie Naudin 1. Swich configuration is Hybrid mode and enable pfc setting seems there is no problem. switch-5e13ce [standalone: master] (config) # show dcb priority-flow-control PFC...
View ArticleCan't install OFED 3.1-1.0.3
I tried to install this latest OFED release on Ubuntu 14.04, but it fails since the "libibverbs1" package is not included (only "libibverbs-dev" is included).
View ArticleClik here to view.
WHAT CABLE SHOULD I USE FOR Mallenox 40GB NIC COMMUNICATE WITH OTHER Mallenox...
hello This a technology company from China, here we have problems, hope some one can tell us how to solve it. This situation is: We had update drive of Mallenox in our computer, and it showed that...
View ArticleClik here to view.
Re: WHAT CABLE SHOULD I USE FOR Mallenox 40GB NIC COMMUNICATE WITH OTHER...
I think you did a test with a pair of FDR HCA. But, I don't know your cable is a Infiniband cable. Did you raise ip SM on one of that 2 system?
View ArticleRe: Are there any applications using RDS over InfiniBand?
Typically the RDS driver is supported by Oracle as it is intended for Orcale Data Bases. We have no record on folks running it with other applications and typically Oracle supports this protocol.
View Articlecannot enable lro in Ubuntu server
Hi, I am trying to enable lru on the mellanox 10g NIC.The default value is off {fixed}.When I tried to enable LRO, I couldnt as this is fixed. The driver version that I am using is 2.1.Is there any...
View ArticleClik here to view.
Re: Read port priority counters is 0 .
Hi Seol, Originally you used PC1 "Clotho" & PC2 "Aprotos", on my previous statement I asked: 1) When you run the "ib_write_bw" from the client (Aprotos), does the IP 192.168.10.10 correspond to the...
View ArticleRe: qperf version in RHEL6
I cant reproduce this using the Mellanox create yum repo script that comes with Mellanox OFED. Can you try the same ?
View ArticleRe: WHAT CABLE SHOULD I USE FOR Mallenox 40GB NIC COMMUNICATE WITH OTHER...
HI Yanqing Could you let me know which cable do you use? If it is Mellanox cable ? And if you have enable OpenSM on one server ? Thanks
View ArticleRe: WHAT CABLE SHOULD I USE FOR Mallenox 40GB NIC COMMUNICATE WITH OTHER...
Yes, I use FDR Optical cables from Mellanox. Your picture shows a Infiniband HCA (IPoIB) then you must running state SM on one of the direct connected Windows system...:)
View ArticleRe: Can't install OFED 3.1-1.0.3
Hi Brendan, Its one of the dependencies for the driver installation. Can you please install the "libibverbs1" package ? ThanksEinav
View ArticleClik here to view.
Re: Can't install OFED 3.1-1.0.3
Sorry, for the incorrect information. The issue was actually from the previous version not being uninstalled completely. Running the newer uninstall.sh script solved it for me.
View Article