On a MSX-6036 switch, how do I set the date on the switch?
On a MSX-6036 switch, how do I set the date on the switch?The command reference manual suggests using theset clock command, however that only allows me to set the time and not the date.
View ArticleRe: On a MSX-6036 switch, how do I set the date on the switch?
It is the command clock set See below:switch (config) # clock set ?<hh>:<mm>:<ss> switch (config) # clock set 12:00:00 ?<cr> Set the...
View ArticleRe: Where can the SFP EEPROM be read for a QSA adapter?
hi, Try: # ethtool -m <interface> with the latest version of ethtool. HowTo Find Cable Info on Mellanox Adapters and Switches I hope that it helps. Thanks,Ophir.
View ArticleRe: Where can the SFP EEPROM be read for a QSA adapter?
I'm a software developer at F5 Networks, and I'm trying to modify our TMOS software to properly recognize the SFP modules. We have our own custom software for reading the SFP EEPROMs, and I want to...
View ArticleFan failures in Mellanox Infiniband switches
KLA-Tencor uses Mellanox Infiniband switches in our tools; the tools are installed in semi-conductor fabs around the world. Because our tools are installed in semi-conductor fabs, smoke resulting from...
View ArticleClik here to view.
mpirun fails when issued as non-root
I used to be able to run mpirun as non-root but after upgrading to 2.6.32-504.23.4.el6.x86_64 6.6, the command fails and have to issue as root or sudo.[0] MPI startup(): ofa fabric is not available and...
View ArticleClik here to view.
How to modify Reports Counters in NEO-UFM ?
Hi, I am using NEO ver.1.1.0-3 on CentOS 6.5 now..Following 'Mellanox NEO™User Manual Version 1.1' Document, i installed well and no problem with using it. But i want to modify Reports Counters, can...
View ArticleRe: How to modify Reports Counters in NEO-UFM ?
Hi Taiyoum kim, Right now we don't have the ability to change the units from the default, but it will be available in version 1.5 (at the end of December). Regards,David Slama
View ArticleClik here to view.
Re: Where can the SFP EEPROM be read for a QSA adapter?
Hi erikstaats,Please contact Mellanox support on this question, they will help you on that. Thanks,Ophir.
View Articlelldp not available
Trying to enable lldp on all my network devices. But I don't see lldp option on mellanox. What can I do? upgrade? etc? # sho verProduct name: SX_PPC_M460EXProduct release: SX_3.3.5006Version...
View ArticleRe: lldp not available
switch > enableswitch # configure terminalswitch (config) # lldp This commands enabled the lldp on the switch Than useswitch (config) # show lldp ... and you get various of lldp options. See also...
View ArticleRe: lldp not available
[standalone: master] (config) # lldp% Unrecognized command "lldp".Type "?" for help. I don't think it's enabled at all to enable lldp. Any idea?
View ArticleRe: lldp not available
Is this switch configured as Ethernet switch?What is the switch model? can you run: show system profile mti-mar-sx04 [my-new-domain: standby] (config) # show system profile eth-single-switch
View ArticleRe: lldp not available
I'm pretty newb on Mellanox. I'm assuming switch. It's in HA pair. (config) # show system profileib-single-switch Product name: SX_PPC_M460EXProduct release: SX_3.3.5006Build ID:...
View ArticleRe: lldp not available
Right, that makes sense.Your switch is in InfiniBand mode only.You need to install the Ethernet license to be able to convert ports from InfiniBand to Ethernet. # license install <license key>...
View ArticleRe: lldp not available
I don't think my management wants to buy anything new for this set of switches. But at least you solved the mystery. Thanks a lot for your time!
View ArticleClik here to view.
Re: On a MSX-6036 switch, how do I set the date on the switch?
Check this also HowTo enable NTP on Mellanox switches
View Article