Clik here to view.
Re: MHEA28-XTC on Windows Server 2012 R2 and Windows 7
Not sure if these will run on the ESXi driver, won't hurt to give it a try. As far as I know they're only certified work on Linux boxes
View ArticleRe: Omnios + RSF-1 + Inifiniband
Hi, Thanks, I have finally set this up now. It appears to be working, failover occurs and the datastores come backup after a few seconds, so looking good.I have a couple of additional questions for...
View ArticleRe: Omnios + RSF-1 + Inifiniband
Hi David Glad to to hear that yout got in a working condition at least for non-Windows. The failover in Solaris is realized with an IPMP Group containing the datalinks: .....storage_64_0 803D net5...
View ArticleRe: vSphere 1.8.3 driver iSER result
Hi!You said that your storage os is Solaris 11.2 with ConnectX-2 VPI 2.10.700 firmware.Does it your storage reboot -p command execute properly? My OmniOS only support to "reboot -p" properly with CX-2...
View ArticleHow to enable nvgre on ConnectX ® -3 Pro
Hi, I am using ConnectX ® -3 Pro nic with OVS version 2.3.31. With VxLAN i am achieving 9.10 to 9.30 Gbps data. But with NVGRE configuration i am getting around 3.20 to 4.00 Gbps data. Please can help...
View ArticleRe: vSphere 1.8.3 driver iSER result
reboot -p works without any issue for me. Let me try 4K MTU next for performance.
View ArticleThe ibutils rpm from MLNX_OFED 2.4.1 requires libopensm.so.8()(64bit)
The ibutils-1.5.7.1-0.11.g616bc1e.x86_64.rpm from MLNX_OFED 2.4.1 requires libopensm.so.8()(64bit), but I failed to find opensm-libs that provides this version of libopensm.so.8. Could someone points...
View ArticleRe: How to enable nvgre on ConnectX ® -3 Pro
I moved the questions to the technical forums
View ArticleClik here to view.
Re: The ibutils rpm from MLNX_OFED 2.4.1 requires libopensm.so.8()(64bit)
The error messages were: Error: Package: ibutils-1.5.7.1-0.11.g616bc1e.x86_64 (centos6_MOFED) Requires: libopensm.so.8()(64bit)Error: Package: ibutils-1.5.7.1-0.11.g616bc1e.x86_64...
View ArticleClik here to view.
Re: vSphere 1.8.3 driver iSER result
1.What is the SRP?2. Look at the picture iser installed successfully?3.How to connect to iser target?
View ArticleBest way to connect/cable WAN/Internet to Mellanox Switch, Advice on using...
Hi guys, I have a fairly complicated situation, and I need all the help I can get on it, so here it goes; Here is my situation; I have 2xSX1036 with L3 and 56Gbe functionality. All my hosts have eather...
View ArticleRe: Best way to connect/cable WAN/Internet to Mellanox Switch, Advice on...
So I did some testing on my home network which uses standard rj45 cat6 the same as the ISP installed modem and router would use, and I have to say I am quite shocked about the results. Using HRPING...
View ArticleRe: Difference between PRO VPI and PRO EN adapter (RoCE V2) (Hyperconverged...
Well, I am not really sure about allot of things. This is what I have; 3 Servers with ConnectX3 VPI PRO adapters 56gbe dual port3 Servers with ConnectX3 EN adapters 56gbe dual port2x sx1036 with...
View ArticleClik here to view.
Re: vSphere 1.8.3 driver iSER result
1. SRPSCSI Remote Protocol or RDMA Remote Protocol. The secret source of why Mellanox perform better than others.2. Which version of driver did you install? What's your HCA?3. What target are you using?
View ArticleClik here to view.
ibdump on Connect-IB cards
We have Mellanox Connect-IB MCB194A-FCAT,FDR cards, and would like to run ibdump to diagnose message issues.However, it seems like ibdump is searching for mlx4 device by default and may not support...
View ArticleProblem with MEllanox MT27500 10GB under Ubuntu 14.04
I have Ubuntu 14.04 with kernel 3.13.0-24-generic (tried with 14.04.2 with the same result) running on server with Mellanox 10GB card. It's connected to Juniper switch.Unfortunately, Mellanox card...
View ArticleRe: ibdump on Connect-IB cards
As far as i know, the current driver is lacking the support for this functionality. The guys in Mellanox saying that it is expected to be support on the upcoming Mellanox OFED driver 3.0 (sometimes...
View ArticleRe: Problem with MEllanox MT27500 10GB under Ubuntu 14.04
Hi, What cable type are you using (Part Number) ?
View ArticleRe: The ibutils rpm from MLNX_OFED 2.4.1 requires libopensm.so.8()(64bit)
opensm-libs is located in the Mellanox OFED iso file under the RPMS directory. Regardless, I'd drop ibutilis-1.x and use ibutilis2 has it has better visibility and debugging capabilities to the...
View Article