Ophir,
I downloaded driver from your web site and probably it seems to behave much
better now. I am giving you output of the commands what you asked earlier.
# ibdev2netdev
mlx4_0 port 2 ==> eth4 (Down)
mlx4_0 port 1 ==> eth5 (Down)
# ofed_info | head
MLNX_OFED_LINUX-2.3-1.0.1 (OFED-2.3-1.0.0):
ar_mgr:
ar_mgr/e338fbc05dd6b480f8505791e50700b7/ar_mgr-1.0-0.23.g20d8d45.tar.gz
bupc:
bupc/6b0f0c8b7d7ff2e258e600d65f6da291/bupc-2.18.0-421.src.rpm
cc_mgr:
cc_mgr/4a29eb085479e51b6bb278efcddfe379/cc_mgr-1.0-0.22.g20d8d45.tar.gz
#
So interface eth4 and eth5 can be used for iSER, correct?
I have two cards and want to set one card in one system as iSER Initiator
and other card as iSER target.
Can I use these two cards in the same system as Initiator and target?
Thanks,
Anil