Troubleshooting the iSER enable on Mellanox ConnectX-2 EN and running iSCSI traffic.

Hi,

I have folowing card on my system.

lspci | grep -i mellanox

02:00.0 Ethernet controller: Mellanox Technologies MT26448 [ConnectX EN 10GigE, PCIe 2.0 5GT/s] (rev b0)

I am running CentOs 6.5.

uname -a

Linux RV-189 2.6.32-431.el6.x86_64 #1 SMP Fri Nov 22 03:15:09 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

cat /etc/issue

CentOS release 6.5 (Final)

Kernel \r on an \m

I am following the link .

HowTo setup RoCE connection using Inbox driver (RHEL, Ubuntu)

I do not see the enp5s0 or any other interface which can describe the Mellanox card on my system.

#ifconfig enp5s0 12.12.12.1/24 up

Can someone pl let me know what am I missing?

Thanks in advance,

Anil